Primers for Plastic Surfaces : Polypropylene & FRP Primers  


Product Description :


Anupam PP Primer and Anupam FRP Primer are air drying single pack primers that promote excellent adhesion of coatings on polypropylene and FRP substrates. These primers provide excellent adhesion when topcoated with a wide range of finishes. These primers resist redissolving during topcoat application resulting in excellent holdout because they are insoluble or slightly soluble in most solvent used in topcoats.

Physical and Technical Data :-
Colour Pale Yellow Liquids
Dry Film Thickness 1 - 2 microns
Thinner Intake Not required
No. of Coats recommended One coat only
Appearance Smooth and clear
Compatibility with topcoats Polyurethane, Epoxy and other organic topcoats
Recoatability After 5 minutes and before 1 hour of application
Theoretical Coverage - (no loss) 150 - 160 sq. ft. per litre
Packing 1 litre, 5 litres and 20 litres
Method of Application Spray / Cotton Swabbing

Disclaimer :-


Information provided herein is based upon tests believed to be reliable. It does not guarantee the results to be obtained. Nor does it make any express and implied warranty or merchantability, or fitness for a particular purpose concerning the effects or results of such case. It does not release you from the obligation to test the products supplied by us as to their suitability for the intended uses. The application, surface preparation and use of the products are beyond our control and, therefore, entirely your own responsibility.

Download as PDF format
Top side


View site-map Home page About us Search View products View our services Add your feedback View contact us Click to go top position Click to Download pdf